Wet room Linear Wall Drains designed to fit flush against the wall

Linear Wall Drain

Designed with the grill positioned flush against the wall.

The Linear Wall Drain is a development of our popular Linear Screed Drain and has been designed with the grill positioned flush against the wall, giving a sleek and unobtrusive finish, using our popular waterless trap.

Product Downloads

LINEAR WALL DRAIN

The Linear Wall Drain is a development of our popular Linear Screed Drain and has been designed with the grill positioned flush against the wall, giving a sleek and unobtrusive finish.

linear screed drain

It is designed for concrete or screeded floors with the key feature being its height - the total height from the base to the top of the trough being only 67mm, making it perfect for today’s modern construction methods.
The drain incorporates a unique waterless trap which has a lifetime guarantee and has been granted BBA approval. It is available with one, two or three traps and a choice of stylish grill finishes.

WATERLESS TRAP

The waterless trap has been specially designed with a spring loaded mechanism which keeps the trap sealed when not in use. This ensures that even when left unused for prolonged periods
the trap cannot dry out, making it ideal for situations where the shower is not in everyday use.
The smart design of the linear trough allows the waste position to be rotated through 360° enabling installation in most scenarios with ease.

• BBA approved
• Variable waste position
• Easy to clean and replace trap
• No requirement to top up the trap during long periods of non-use
• No siphoning of the trap due to other appliances
• No chance of smells or gases entering the room

NUMBER OF TRAPS

A single trapped Linear Screed Drain has a flow rate of up to 29 L/min* with the support brackets on either side.
When a higher flow rate is required a double trap version is available, allowing up 57 L/min*.

The traps are positioned near each end of the trough with a single support bracket in the centre. For higher flow rates, a triple trapped drain is also available with support brackets at either end.

KEY FEATURES

Height 67mm including trap
BBA approved
Lifetime Guarantee
Waterless trap
Variable waste positions
Flow rate up to 70L/min
Height / Width adjustable
Easy to clean and replace trap
Bespoke design available

	Line Drawings
	Product Downloads
	View Line Drawings Online

PRODUCTS

Modular Wet-floor

Installation Service

flow rates

The Type A – Solid Grill is supplied as standard. For alternative grill finishes click here

GRILL LENGTH / HEIGHT

All Linear Screed Drains are manufactured with one trough size at 660mm, all lengths of grill are then fitted onto this trough. Bespoke grills can be manufactured for sizes in between and over those that are standard. Please contact our technical team to discuss your requirements:

The Linear Screed Drain is available in four standard sizes:
• 600mm x 86mm
• 800mm x 86mm
• 1000mm x 86mm
• 1200mm x 86mm

The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to 20mm.
Additional spacers are available upon request for tiles thicker than 20mm.
The position of the grill in relation to the wall, is adjustable by up to
13mm to accommodate different wall tile thicknesses

GRILL FINISH

The grill is available in various different finishes. All are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish. Type A Solid Grill is supplied as standard unless otherwise specified.

Type A - Solid Grill:
Grained stainless steel with a 3mm gap around the grill for a sleek stylish finish.

Type B – Oblong Slots:
Three rows of oblong slots in a highly polished mirrored stainless steel finish.

Type C – Square Holes:
Three rows of squares in a grained stainless steel finish.

PRODUCT DETAILS

HOW TO SPECIFY

To specify your Linear Screed Drain, first select the required number of traps (depending on the required flow rate), followed by the grill length and finally the grill finish.

Membrane
It is essential that the floor is waterproofed or ‘tanked’ using one of the RIW membranes shown below. For solid floors we recommend the Tilesafe/Screedsafe membrane is applied to the shower area plus an additional one metre in either direction. FWM should then be applied to the walls of the shower area plus an additional 300mm and overlapped onto the Tilesafe/Screedsafe Reinforcing Tape.

Example: A single trap, 600mm Linear Wall Drain with solid grill would be code: LSW1-600/Type A
Example: A double trap, 800mm Linear Wall Drain with square holes would be code: LSW2-800/Type C

IN DETAIL

sideview

	View Line Drawings Online		Product Download	..Go to the top of this page.
	Linear Wall Drain Brochure		Full Brochure