Linear Screed Drain
Overall height 67mm (min) including trap.
The Linear Screed Drain has been specifically developed for modern floors that have a low clearance, such as concrete or screeded floors. Our unique waterless trap is used to deliver flow rates of up to 70 litres per minute.
 |
 |
Product Downloads |
LINEAR SCREED DRAIN
The Linear Screed Drain has been developed specifically for concrete or screeded floors and can be used on concrete slabs, planks and block and beam floors.
The key feature of the Linear Screed Drain is its
height - the total height from the base to the top of
the trough being only 67mm, making it perfect for today’s 
modern construction methods.
The drain incorporates a unique waterless trap which has a lifetime guarantee and has been granted BBA approval. It is available with one, two or three traps and a choice of stylish grill finishes.
WATERLESS TRAP
The waterless trap has been
specially designed with a spring
loaded mechanism which keeps
the trap sealed when not in use.
This ensures that even when left
unused for prolonged periods
the trap cannot dry out, making
it ideal for situations where the
shower is not in everyday use.
The smart design of the linear
trough allows the waste position
to be rotated through 360°
enabling installation in most
scenarios with ease.
• BBA approved |
|
NUMBER OF TRAPS
A single trapped Linear Screed Drain has a flow rate of up to 29 L/min* with the support brackets on either side. The traps are positioned near each end of the trough with a single support bracket in the centre. For higher flow rates, a triple trapped drain is also available with support brackets at either end. |
 |
 |
 |
KEY FEATURES
- Height 67mm including trap
- BBA approved
- 360° rotatable waste position
- Waterless trap
- Multiple traps available
- Flow rate up to 70L/min
- Height adjustable grill
- Easy to clean and replace trap
- Bespoke design available
 |
Line Drawings |
 |
Product Downloads |
 |
View Line Drawings Online |
PRODUCTS
 |
 |
.
The Type A – Solid Grill is supplied as standard. For alternative grill finishes click here
|
|
GRILL LENGTH / HEIGHT
All Linear Screed Drains are manufactured with one trough size at 660mm and all lengths of grill are then fitted onto this trough. Bespoke grills can be manufactured for sizes that are in between or over the standard sizes. Please contact our technical team to discuss your requirements:
 |
 |
|
The Linear Screed Drain is available in four standard sizes: |
The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to 20mm. |
GRILL FINISH
The grill is available in various different finishes.
All are manufactured in 316 marine grade stainless steel, ensuring a stunning high
quality finish. Type A Solid Grill is supplied as standard unless otherwise specified.
PRODUCT DETAILS
HOW TO SPECIFY
To specify your Linear Screed Drain, first select the required number of traps (depending on the required flow rate), followed by the grill length and finally the grill finish.
Membrane
It is essential that the floor is waterproofed or ‘tanked’ using one of the RIW membranes in the Product Details section on page 4.
For solid floors we recommend the Tilesafe/Screedsafe membrane is applied to the shower area plus an additional one metre in either direction.
FWM should then be applied to the walls of the shower area plus an additional 300mm and overlapped onto the Tilesafe/Screedsafe Reinforcing Tape
Example: A single trap, 800mm Linear Screed Drain with square holes would be code:
LSD1-800/Type C
Example: A double trap, 1000mm Linear Screed Drain with solid grill would be code: LSD2-1000/Type A
IN DETAIL
|
View Line Drawings Online | |
Product Downloads | Go to the top of this page. |
|
Linear Screed Drains Brochure | |
Full Brochure |